Atomos Sumo19M Monitor

MSRP: $1,495.00

Atomos

Specs

Weight
Without batteries, media & stand	5.35kg / 11.8lb
With stand	5.9kg / 13.0lb
Dimensions (W x H x D mm)	504 x 310 x 63mm, 19.8" x 12.2" x 2.5" (without stand) 504 x 330 x 180mm, 19.8" x 13" x 7.1" (with stand)
Construction	Aluminium alloy chassis with built in armor protection
Mounting Points	1/4-20 screw; 4 x top, 4 x bottom, 2 x side 3/8-16 screw; 2 x top, 2 x bottom, 1 x side VESA mount rear

Power
Operating power	75W
Compatible batteries	V-Lock / Anton Bauer via XLR terminal (optional mounting plates available) 95Wh or larger recommended.
Input voltage (battery)	14.4V nominal
Battery time	Depends on Watt Hours specification of battery used
DC In	1 x DC in (12 - 16.8V)
Continuous power * Patent pending	Primary-secondary battery system. Change batteries without losing power Loop batteries continuously

Touchscreen
Size	19”
Resolution	1920 x 1200
PPI	120
Aspect ratio	16:9 native
Color Gamut	REC709 HDTV
Look up table (LUT) support	3D LUT (.cube format)
Anamorphic de-squeeze	2x, 1.5x, 1.33x, Panasonic 8:3
Technology	SuperAtom IPS panel (capacitive touch), calibration to Rec.709 with optional calibration unit

HDR
AtomHDR	Yes
Supported Log formats	Sony SLog2 / SLog3, Canon CLog / CLog 2, Arri Log C, Panasonic Vlog, JVC JLog, Red LogFilm, FujiFilm Flog
Supported Gamuts	Sony SGamut / SGamut3 / SGamut3.cine Canon Cinema / BT2020 / DCI P3 / DCI P3+ Panasonic V Gamut Arri Alexa Wide Gamut
Bit depth	10-bit (8+2 FRC)
Brightness	1200nit (+/- 10% @ center)
HDR input (PQ/HLG) HDR output (PQ/HLG)	Yes / Yes Yes / Yes

Video Input/Loop Out
HDMI	1 x HDMI (2.0)
SDI	2 x 4K-SDI 12G/6G or HD-SDI 3G/1.5G
Signal	Uncompressed true 10-bit or 8-bit 422 (camera dependent)

Video Output (Play Out)
HDMI	1 x HDMI (2.0)
SDI	1x 4K-SDI 12G/6G or HD-SDI 3G/1.5G
Signal	Uncompressed true 10-bit or 8-bit 422 (playback file dependent)

Supported Loop Out Formats
HDMI to HDMI	720p 50/60, 1080i 50/60, 1080p 24/25/30/50/60/100/120 2160p 24/25/30/50/60
SDI to SDI	720p 50/60, 1080i 50/60 1080pSF 24/25/30 1080p 24/25/30/50/60/100/120 2160p 24/25/30/50/60

Video Signal Conversion
HDMI to SDI	720p 50/60, 1080i 50/60, 1080p 24/25/30/50/60/100/120/200/240 2160p 24/25/30/50/60
SDI to HDMI	720p 50/60, 1080i 50/60, 1080p 24/25/30/50/60/100/120/200/240 2160p 24/25/30/50/60

Supported Codecs & Frame Rates (Record & Playback)
Raw Record	N/A
Raw to ProRes / DNxHR	N/A
Video to ProRes / DNxHR (DNx utilizes a .MOV wrapper)	N/A

Onboard Processing
Pulldown removal	N/A
4K UHD downscale for HD monitoring	Yes - Loop-out (Not available in RAW)

Audio In/Out (48kHz PCM Audio)
HDMI	2 or 8ch 24-bit, camera dependent
SDI	12ch 48kHz 24-bit
Audio	Line in / Mic in / Headphone out 2ch 48kHz 24-bit
Headphone Out	3.5mm
Built-in Speakers	No

Remote Start/Stop
HDMI	N/A
SDI	N/A
Other	N/A

Playback
Playlist / Genlock / LTC	No / No / No
CDNG (Recorded content)	No
ProRes (Recorded content)	No
DNxHR / DNxHD (recorded content)	No

Recording
Pre-roll record	No
Custom timelapse	No
Meta data tagging	No
Supported media	2.5” SSD/HDD. Visit atomos.com/drives for list of tested and approved drives
Master caddy case	Master Caddy II (included) 75mm x 105mm x 12mm
Master caddy dock	2.5” SATA to USB 2.0/3.0
Supported applications	Supported Applications FCPX/FCP7+ / Media Composer 5.0+ / Premiere 5.5+ EDIUS 6.0+ / Vegas Pro 10+ / Lightworks / Autodesk Smoke 2015
XML support	No
Accessories included	SUMO19M unit, 1x Master Caddy II, 1x BattWing mount- ing bracket with 4x screws, 2x Desktop Feet with 4x 1/4” Mounting screws, AC power supply
Optional extras	Sunhood, VESA battery adapter plate, Atomos HDMI cable, X-Rite i1DisplayPro calibration
Warranty	1 year. Extended to 3 years on product registration

All specifications correct when published, subject to E&OE.

24/30/60 frame rates also means 23.98/29.97/59.94 frame rates for all resolution

Share:

Description

Description

REALTIME EXPOSURE ON SET FROM LOG FOR HDR & SDR

The AtomHDR engine perfectly maps Log/PQ/HLG from popular cameras/ game consoles to SUMO19M’s amazing panel, resolving 10+ stops of HDR in real-time for perfect setting. Pass-on HDR to other devices over HDMI or SDI, in HD or 4K and in Rec709/HLG/PQ. To get the best image from your sensor, you must shoot Log and only AtomHDR makes exposing Log easier, unlocking every camera’s HDR potential. The SUMO19M inputs can be used as an editing and grading companion in the studio with full SDR & HDR support through 709/HLG/PQ.

MONITORING MADE EVEN SIMPLER WITH ATOMOS 8

The SUMO19M is all about performance monitoring; HDR or SDR, 4Kp60 or HD, 12G-SDI or HDMI 2.0 and everything in between. With the recording functions removed, the user interface has been redesigned to emulate a button-based monitor. All the precision scopes can be accessed from the bottom of the screen as an overlay - simple and intuitive adjustments, just like your phone.

NOISE FREE SDR WITH LOG & ATOMHDR

Today’s productions require flexibility to perform, no matter the camera or production you MUST be able to deliver superb SDR or mind blowing HDR to your clients. Shooting Log from your camera and exposing using AtomHDR gives you the maximum latitude and flexibility in Post Production to produce the cleanest noise-free SDR image and highest dynamic range HDR.

SELECTABLE DUAL 12/6/3G-SDI INPUT FOR A/B COMPARISON

The SUMO19M accepts up to 4Kp60 or HDp240 over HDMI or the dual 12/6/3G-SDI inputs. Additionally, there are dedicated input selection buttons on the user interface to make A/B comparison between sources simple and simultaneous HDMI and SDI output of the corresponding input for routing to other monitors, recorders or switchers.

3D LUT’S - PRECISE, FLEXIBLE AND INFINITE.

Load an infinite number of custom LUT’s onto SUMO19M via the HDD/SSD slot. Apply and compare looks for finishing in SDR or HDR, form your favourite LUT for your camera or from your post team for consistency across shoots. All stakeholders from customers to directors can see the creative finish live on the day!

HIGH BRIGHT 1200NIT 19" CALIBRATED 1920X1080 MONITOR

The extremely bright 1200nit display means you can accurately monitor, even when outside in full daylight. SUMO19M has a wide viewing angle so that everyone on set can review the action and also features optional calibration using X-Rite’s i1DisplayPro for ongoing accurate HDR and Rec709 monitoring.

BUILT FOR PRODUCTION

The Aluminium alloy chassis with built-in armor houses sixteen 1/4" and eight 3/8" mounting points around the top/bottom/sides, a rear panel VESA mount and included feet for a variety of mounting configurations.

CONTINUOUS POWER

The optional mounting plates connect dual V-Lock or Anton Bauer batteries that work in tandem with our patent pending continuous power system. Sumo automatically swaps to the second battery when power is low, allowing the drained battery to be hot swapped to ensure you are never without power in the field.

Specs

Weight
Without batteries, media & stand	5.35kg / 11.8lb
With stand	5.9kg / 13.0lb
Dimensions (W x H x D mm)	504 x 310 x 63mm, 19.8" x 12.2" x 2.5" (without stand) 504 x 330 x 180mm, 19.8" x 13" x 7.1" (with stand)
Construction	Aluminium alloy chassis with built in armor protection
Mounting Points	1/4-20 screw; 4 x top, 4 x bottom, 2 x side 3/8-16 screw; 2 x top, 2 x bottom, 1 x side VESA mount rear

Power
Operating power	75W
Compatible batteries	V-Lock / Anton Bauer via XLR terminal (optional mounting plates available) 95Wh or larger recommended.
Input voltage (battery)	14.4V nominal
Battery time	Depends on Watt Hours specification of battery used
DC In	1 x DC in (12 - 16.8V)
Continuous power * Patent pending	Primary-secondary battery system. Change batteries without losing power Loop batteries continuously

Touchscreen
Size	19”
Resolution	1920 x 1200
PPI	120
Aspect ratio	16:9 native
Color Gamut	REC709 HDTV
Look up table (LUT) support	3D LUT (.cube format)
Anamorphic de-squeeze	2x, 1.5x, 1.33x, Panasonic 8:3
Technology	SuperAtom IPS panel (capacitive touch), calibration to Rec.709 with optional calibration unit

HDR
AtomHDR	Yes
Supported Log formats	Sony SLog2 / SLog3, Canon CLog / CLog 2, Arri Log C, Panasonic Vlog, JVC JLog, Red LogFilm, FujiFilm Flog
Supported Gamuts	Sony SGamut / SGamut3 / SGamut3.cine Canon Cinema / BT2020 / DCI P3 / DCI P3+ Panasonic V Gamut Arri Alexa Wide Gamut
Bit depth	10-bit (8+2 FRC)
Brightness	1200nit (+/- 10% @ center)
HDR input (PQ/HLG) HDR output (PQ/HLG)	Yes / Yes Yes / Yes

Video Input/Loop Out
HDMI	1 x HDMI (2.0)
SDI	2 x 4K-SDI 12G/6G or HD-SDI 3G/1.5G
Signal	Uncompressed true 10-bit or 8-bit 422 (camera dependent)

Video Output (Play Out)
HDMI	1 x HDMI (2.0)
SDI	1x 4K-SDI 12G/6G or HD-SDI 3G/1.5G
Signal	Uncompressed true 10-bit or 8-bit 422 (playback file dependent)

Supported Loop Out Formats
HDMI to HDMI	720p 50/60, 1080i 50/60, 1080p 24/25/30/50/60/100/120 2160p 24/25/30/50/60
SDI to SDI	720p 50/60, 1080i 50/60 1080pSF 24/25/30 1080p 24/25/30/50/60/100/120 2160p 24/25/30/50/60

Video Signal Conversion
HDMI to SDI	720p 50/60, 1080i 50/60, 1080p 24/25/30/50/60/100/120/200/240 2160p 24/25/30/50/60
SDI to HDMI	720p 50/60, 1080i 50/60, 1080p 24/25/30/50/60/100/120/200/240 2160p 24/25/30/50/60

Supported Codecs & Frame Rates (Record & Playback)
Raw Record	N/A
Raw to ProRes / DNxHR	N/A
Video to ProRes / DNxHR (DNx utilizes a .MOV wrapper)	N/A

Onboard Processing
Pulldown removal	N/A
4K UHD downscale for HD monitoring	Yes - Loop-out (Not available in RAW)

Audio In/Out (48kHz PCM Audio)
HDMI	2 or 8ch 24-bit, camera dependent
SDI	12ch 48kHz 24-bit
Audio	Line in / Mic in / Headphone out 2ch 48kHz 24-bit
Headphone Out	3.5mm
Built-in Speakers	No

Remote Start/Stop
HDMI	N/A
SDI	N/A
Other	N/A

Playback
Playlist / Genlock / LTC	No / No / No
CDNG (Recorded content)	No
ProRes (Recorded content)	No
DNxHR / DNxHD (recorded content)	No

Recording
Pre-roll record	No
Custom timelapse	No
Meta data tagging	No
Supported media	2.5” SSD/HDD. Visit atomos.com/drives for list of tested and approved drives
Master caddy case	Master Caddy II (included) 75mm x 105mm x 12mm
Master caddy dock	2.5” SATA to USB 2.0/3.0
Supported applications	Supported Applications FCPX/FCP7+ / Media Composer 5.0+ / Premiere 5.5+ EDIUS 6.0+ / Vegas Pro 10+ / Lightworks / Autodesk Smoke 2015
XML support	No
Accessories included	SUMO19M unit, 1x Master Caddy II, 1x BattWing mount- ing bracket with 4x screws, 2x Desktop Feet with 4x 1/4” Mounting screws, AC power supply
Optional extras	Sunhood, VESA battery adapter plate, Atomos HDMI cable, X-Rite i1DisplayPro calibration
Warranty	1 year. Extended to 3 years on product registration