Panasonic AW-HE130 HD Integrated PTZ Camera

MSRP: $8,520.00


$400.00 Instant Rebate

->This is where your TEXT BOX 2 goes

Introducing a new PTZ camera capable Production Quality Full HD video output up to 1080/60p via IP transmission, in addition to 3G-SDI and HDMI. Equipped with three newly developed 1/2.86 MOS sensors for high sensitivity, a superior S/N ratio and high resolution. The AW-HE130W/K also supports PoE+*, so the camera only needs one LAN cable for its power supply, control and video output. Presenting the new standard in versatile, high-quality remote production with 3G-SDI, IP-Streaming, and POE+.

Key features

  • Newly developed 1/2.86-type three MOS sensors
  • 1.4x Extender Zoom
  • 1,4x Extender Zoom
  • PoE+ for Power, Streaming & Control via a Single Cable
  • PoE+ support & one cable operation (power supply, control & video output)

Dimensions (W x H x D) 180 mm x 228 mm x 234 mm
(7-3/32 inches x 9 inches x 9-3/16 inches)
(excluding protrusions, cable cover, direct ceiling mount bracket)
General -
Storage Temperature –20 °C to 50 °C (–4 °F to 122 °F)
Power Requirements DC 12 V (AC adaptor supplied) DC 42 - 57 V (PoE+ power supply)
1.8 A (AC adaptor supplied) 0.6 A (PoE+ power supply)
Ambient Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Finish AW‑HE130WP/AW-HE130WE: Pearl white
AW‑HE130KP/AW-HE130KE: Metallic black
Allowable Humidity Ranges 20 % to 90 % (no condensation)
Mass Approx. 3.1 kg (6.83 lb) [Including mount bracket]
Controller Supported*1 AW-RP120G, AW‑RP50, AK-HRP200G
Lens Motorized 20 zoom, F1.6 to F3.4
(f=4.5 mm to 90 mm; 35 mm equivalent: 32.13 mm to 642.5 mm)
Minimum Illumination 2 lx (50 IRE, F1.6, 36 dB)
Synchro Scan 59.94 Hz: 60.15 Hz to 642.21 Hz
50 Hz: 50.15 Hz to 535.71 Hz
Horizontal Resolution 1000 TV lines Typ (Center area)
Gain Selection Auto, 0 dB to 36 dB
White Balance AWB A, AWB B, ATW, 3200K, 5600K, VAR (2000K to 15000K)
Color Separation Optical System 3MOS
Focus Switching between auto and manual
Focus Distance Entire zooming range: 800 mm (2.62 ft)
Wide end: 400 mm (1.31 ft)
0.30 to 0.75 (Manual setting)
Scene File Scene1, Scene2, Scene3, Scene4
Electronic Shutter Speed 59.94p/59.94i: 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
29.97p: 1/30, 1/60, 1/120, 1/250, 1/500,1/1000, 1/2000, 1/4000, 1/10000
23.98p: 1/24, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
50p/50i: 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
25p: 1/25, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
Imaging Sensors 1/2.86-type Full-HD 3MOS
Chroma Amount Variability OFF, -99 % to 40 %
Camera Unit -
Frame Mix*2 0 dB, 6 dB, 12 dB, 18 dB, 24 dB
Standard Accessories Mount bracket for installation surface (Hanging*6 / Desktop): 1, Drop-prevention wire: 1, Drop-prevention wire mounting screw (comes attached to the unit): 1, Bracket mounting screws (bind-head) M4 x 10 mm: 4, Main unit mounting screw (with flat washer,spring washer) M3 x 6 mm: 1, Cable cover: 1, Power cable: 1, AC adaptor: 1, CD-ROM
Input Connector DC 12 V IN, G/L IN (BNC)
• BBS (Black Burst Sync), tri-level sync supported
• Locking to a color subcarrier is not possible with BBS.
PoE+ (IEEE802.3at standard)
Panning Range ±175°
Quietness NC35 or less
Note *1: It may be necessary to upgrade the version of the controller in order to support the unit. For details on upgrading, visit the support page on the following website.
*2: This cannot be configured when the format is 1080/29.97p, 1080/23.98p, 1080/29.97PsF 1080/23.98PsF, 1080/25p, or 1080/25PsF.
*3: To ensure safety, the unit must be secured using the mount bracket supplied.
*4: Use of an STP (shielded twisted pair) cable is recommended.
*5: Depending on the pan or tilt position, the camera may be reflected in the image.
*6: To ensure more safety, AW-HE130W/K can be secured by using the direct ceiling mount bracket (WV-Q105A).
Installation Method Stand-alone (Desktop) or suspended (Hanging)*3
Output -
Input/Output -
Pan-Tilt Head Unit -
Camera/Pan-Tilt Head Control IP connecting cable
• When connecting through a PoE+ hub:
LAN cable*4 (category 5e or above, straight cable), max. 100 m (328 ft)
• When a PoE+ hub is not used:
LAN cable*4 (category 5 or above, crossover cable) max.100 m (328 ft)
RP connecting Cable
LAN cable*4 (category 5 or above, straight cable), max. 1000 m (3280 ft)
RS-422A, AW series protocol
Video Output HDMI: HDMI connector
• HDCP is not supported.
• Viera Link is not supported.
HD/SD-SDI OUT: SMPTE424/SMPTE292/SMPTE259 standards 75 Ω (BNC x 1)
VIDEO OUT: NTSC/PAL 1.0 V [p-p]/75 Ω (BNC x 1)
Input/Output Connector LAN: LAN connector for IP control (RJ‑45), PoE+
RS-422: CONTROL IN RS-422A (RJ‑45)
MIC/LINE input: ø3.5 mm stereo mini jack Input impedance: High impedance
• During MIC input Supported mic: Stereo mic
(plug-in power, on/off switching via menu)
• Supply voltage: 2.5 V ± 0.5 V
Mic input sensitivity: Approx. -40 dBV ± 3 dBV (0 dB=1 V/Pa, 1 kHz)
• During LINE input
Input level: Approx. -10 dBV ±3 dBV
Pan-Tilt Operation Speed 0.08°/s to 60°/s
Tilting Range*7 –30° to 210°*5

Recently Viewed Products